Bridge Expansion Joint

Product Details:

Modular Expansion Joint is the device used to bridge the Gap provided in between the Structural Elements that could either be the two adjacent deck segments or in between the Abutment and the first deck Slab of the Bridge Structure.

Features

• Water Tightness
• Durable and Maintenance Free
• Smooth Riding Surface
• Minimal Resistance to Structure Movement
• Suitable for movement more than 80 mm

Product Details:

VSIL Slab Seal Expansion Joint As per MoRTH Section 2600, Clause 2607. Main components are Edge Beam and E Seal.

• The steel structure is to be inserted as shown above on either side, little-lowered position
• Top of the insert shall be at par with the finished level of wearing the coat to maintain the chamber
• Steel structure and main reinforcement bar shall be anchored with proper welding
• If required spacer bar shall be used for proper alignment of bolt and leveling of steel insert
• The steel structure is to be packed with the proper mixture of concrete as same as deck casting
• With proper alignment, manufacturer's recommended adhesive to be applied to the steel inserts and the elastomeric slab seal shall be placed over there
• The elastomeric seal shall be tightened with S.S. nut & bold and shall be locked in a washer
• The cavity of the nut & bolt shall be filled with the elastomeric plug, duly applying the adhesive recommended by the manufacturer
• Wearing coat shall be done on the spot, Temperature with adequate care to ensure a waterproof joint with the existing wearing temperature
• To be checked before installing the elastomeric slab unit

Product Details:

Single Strip Seal Expansion Joint consists of two edge beams with anchorage and elastomeric seal held firmly in the housing of edge beam that guarantee water tightness.

Features:

• Make a joint watertight
• A seal is mechanically locked in the extrusion
• suitable for movement up to 80 mm

Additional Information:

• Item Code: EP-07